Configuration
Configuring the Receiver
Configuring the GSM module for Internet access
52
www.javad.com
The following Base and Rover configurations are recommended for the most common
applications. However, you can select configuration parameters as needed for your particular
jobsite.
Note:
Do not make other changes without consulting the TriVU Software Manual.
1. Connect the receiver and computer as described in “Connecting the Receiver and a
Computer” on page 33.
2. Start TriVU. Select the COM port and click Ok (Figure 3-11).
Figure 3-11. Connection Parameters
3. Click Configuration
Receiver.
Note:
Click Apply after making any configuration change; otherwise, the receiver will not register the
change.
