8
to right until the filter is located at locked position and could not move, make sure
3 extended tongue plate on the Filter Holder⑦ are locked to the groove of Brew Head
⑥.
(5)
Place the cup under the Filter holder ⑦ , turn the Control Knob ③ to the coffee
position
,coffee will begin to follow. When the cup is filled to the desired level,
turn the side Control Knob③ to the off position “O”. (Attention: this appliance
does not stop flowing until stopped by hand)
(6)
Once you have prepared the desired amount of coffee, allow the Filter Holder ⑦ to
cool down before removing the holder, using the Drip Tray⑨ to store the residual water
dripped from Filter Holder⑦ and discarding powder when it stops dripping. Rinse the
brew basket with water.
4.3 How to use coffee pod to make coffee
(1)
When the appliance is ready, place the Pod Filter⑩ into Filter Holder⑦ to make sure
it is at the lowest bottom.
