Professional specification
Service Life:> 10000 times
Insulation Resistance: > 1000M 0
Terminal Temperature rise: <50K
Contact Impedance: 0.5m 0
Max Working Temperature: -30°C —+ 50°C
Sealing gasket: rubber or silicon rubber
Withstand Voltage: 2000V
Inlet cable spec: 3*2.5mrriz(YLOB103-36) 3*6mrriz(YLOB103-72)
Shell Material: ABS+PC Alloy
Cable diameter: 12(mm) / 0.47(in)
Contact Pin: Copper alloy, silver or nickel plating Vibration Resistance: Meet JDQ 53.3 requirements
About Maintenance
.In order to ensure the normal service life of the charger and reduce the risk, maintenance must be performed within
the specified time; the maintenance of the equipment needs to be completed by professionals, with use of qualified and
safe maintenance tools.
•
The product is carefully packed in factory. During transportation, strong impact and bumps should be avoided to prevent
damage to the outer packaging of the product.
•
The product should be placed at an ambient temperature of -30°C
—
+50°C with a relative humidity of less than 95%.
The ambient air should not contain acids, alkalis or other corrosive gases and explosive gases, It also should be away
from rain, snow, wind and sand.
1.
Connect the power cord
2.
Power selection(For the first use)
3.
Plug into the car
4. Charging
EN
