24
7.1.3
ÿ
ÿ
M
ICROSOFT
W
INDOWS
®98
The steps are as same as Windows®95’s installation, but the path for subdirectory
\V-107\Win98\ is instead.
7.1.4
ÿ
ÿ
M
ICROSOFT
W
INDOWS
NT™4.0
Steps:
1. SELECT the “Display” icon in control panel and then SELECT the
“Settings” page.
2. SELECT “Display Type...” button in the “Settings” page.
3. SELECT “Change...” button from the Adapter type section.
4. SELECT “Have Disk...” button from the Change Display page.
5. Microsoft Windows NT 4.0 will prompt you for the correct path
where the video drivers are located. ENTER the path “X:\V-
107\Winnt4\” where X: is the CD ROM drive where the Video-
107AGP Software & Documents CD has been inserted.
6. If the driver “
Trident Video Accelerator 3D Adapter
” is listed
under the Display list, SELECT the “OK” button to continue.
7. Once the driver files are copied, RESTART Microsoft Windows NT
4.0 for the changes to take effect.
8. SELECT the desired color palette (the number of colors), desktop
area (resolution), and refresh frequency in the settings page of
Display Properties and then SELECT the “Test” button in the same
page to determine whether your selection works properly. SELECT
“Apply” to active the selected mode.
Note:
The procedure of display driver installation it required setup with service
pack3 (Microsoft® Windows NT™4.0) first.
8. Technical Assistance
Q:
Why is the display shifted or changed sizes when I switch
display modes?
Explain and Suggestion:
Some monitors lack auto-sizing features or just do not
synchronize properly to the video board output. In some cases,
horizontal and vertical display adjustments may be necessary.
Use the monitor control panel functions to adjust screen.
Summary of Contents for Video-107AGP3D
Page 41: ...41...