Jaton SonicWave-SR, User Manual

Page: 19 / 83

SonicWave - SR
User’s Guide
Version 4.0
19
9. FM801 Joystick Device should be found again. This is
second part of the installation. (Repeat the same
procedures indicated above from step 2-8).
The Setup utility can be run either through CD
Autorun feature implemented by Microsoft
Windows if properly activated, or one may run it
manually by executing the Setup program
provided in the driver disk or CD.
The utility will give users flexibility on driver
installation. It can be used for the following
purposes.
•
Install driver before the hardware installation.
•
One step driver installation
•
Refresh installation when encountering difficulties in
manual installation of the sound card driver.
•
Same utility will also be used for driver upgrading to
the newest sound card driver.
CD Autorun Setup
The Autorun setup feature can only run with CD.
When the Windows Plug-and-Play detection has
prompt the “Add hardware Wizard” to you, click
on “
Cancel ” to stop the . This utility will enable
you to install drivers for Windows only , and
DirectX 8.0 engine for the PCI sound card. As the
CD is inserted (assuming the auto-insertion
feature is enabled under your Windows operating
system) the PCI sound card driver setup menu will
appear on your screen.
1. Select using your pointing device (e.g. mouse) on the
correct operating system that you are currently