INSTRUCTIONS OF USE
Before using for the first time, clean the grill with a damp cloth. Next, dry carefully
and spread a little oil with a cloth or kitchen roll.
Before each use pour some oil on the grill.
Place the appliance on a flat and heat resistance surface.
The tray (7) must be in place, otherwise, the juices and fat resulting from the
cooking will spill onto the surface.
If you wish you can slope the grill making easier the fat and grease collection. To do
that turn the tip-up support (5) until the end and remaining in that position leave the
grill on the surface.
Insert the connector (1) into the base (4), bearing in mind that the temperature
selector (2) is in the top position.
Turn the temperature selector (2) to the desired position, according to the type of
food you are going to prepare using as a reference the selected temperature of the
pilot light position (3). Firstly it is advisable to put the selector to its highest
position, to let the grill reach, as soon as possible, a good temperature. After that you
can, if you consider it convenient, change the selector position.
Plug into the mains. The pilot light (3) will go on. When the pilot light goes off the
grill will have reached the selected temperature.
Place the food on the grill (6).
Always use wooden utensils to move or turn the food over. The use of forks or other
metal utensils may scratch the surface.
MAINTENANCE AND CLEANING
Before you proceed to cleaning, unplug the appliance from the mains and remove
the connector from its base.
Do not wait for the grill to cool completely. The cleaning of the surface will be
easier if it is still warm. It is enough to use a slightly dampened cloth and if there
were some difficult residues they may be cleaned with a cloth dampened in a little
oil.
It may be cleaned with soap and water, taking care to rinse carefully afterwards.
Important: If you have immersed it in water or rinsed with abundant water
you must dry the base of the connector (4) and the pins before using it again.
Do not use abrasive or chemical products, metallic scourers, and such may
deteriorate the protection.
The tray (7) may be cleaned with water and detergent suitable for the dishwasher.
The connector must always be cleaned with a dry cloth and must never be immersed
in water.
ENVIRONMENT PROTECTION
Dispose the appliance according to the local garbage regulations.
Never throw it away to the rubbish. So you will help to the improvement of the
environment.
