8
9
• Do not connect the appliance to the mains without checking
that the voltage on the rating plate and that of your household
are the same.
• Manipulation or replacement of any component must be
performed by an authorized service centre.
• VERY IMPORTANT: Do not immerse the main body of the
appliance in water or any other liquid.
• This appliance has been designed for domestic use only. Do not
use for periods of time exceeding 1 minute. After this period of
time allow to cool for some minutes before using it again.
• WARNING: The appliance has a security system that
disconnects it automatically if it was overheated. If this
happens, unplug it from the mains and wait for some
minutes before connecting it again.
• Do not use the blender empty.
• Do not use it outdoors.
• Don’t allow children play with the appliance. Keep the
appliance out of the reach of children.
• Make sure neither the appliance nor the cable are in direct
contact with hot surfaces or objects.
• Always disconnect it from the mains when you do not use it
and before assembling / disassembling or when cleaning.
• Take care with the blade of the stick because it is very sharp.
• There are risks of injury in case of improper use. You must
be careful when handling the cutting blades, when the jug is
empty and during the cleaning.
• If the power cord is damaged, it must be replaced by the
manufacturer or by its after-sales service or similar qualified
personnel in order to avoid a danger.
INSTRUCTIONS OF USE
• Remember that when you place or replace the stick, the blender must be disconnected of the mains.
• To insert the stick (4) into the body (3), make coincide the indication placed in the stick with the indication
placed in the body. Next turn the stick to the left side till coincides with the position and till the end to
leave it correctly fixed.
• To release the stick, turn it to the right side till the indication of the stick coincides with the indication of
the body .
• Put the stick into the foods and press the power pushers bearing in mind that:
-
Pusher II: maximum power.
-
Pusher I: minimum power.
