12
13
• VERY IMPORTANT: Never immerse the appliance in water or
any other liquid.
• You may get some smoke and/or smells during the first few
uses. This is completely normal in this kind of appliances.
• During the first use it is possible that the products used in the
manufacturing process of the appliance may contaminate the
steam. We recommend that you allow the steam to flow for a
few minutes before starting to iron.
• It there still rests of water in the tank, it is due to the quality
controls made in our production line.
• The cleaning and maintenance done by users, can not be done
by children without any supervision.
• If the power cord is damaged, it must be replaced by the
manufacturer or by its after-sales service or similar qualified
personnel in order to avoid any danger
INSTRUCTIONS OF USE
AUTO SHUT OFF
• The iron is protected by a safety device, which automatically disconnects it after a certain period of time
depending on the position the iron has been left.
-
Horizontal position: 30 seconds approximately.
-
Vertical position: 8 minutes approximately.
• When this happens it will beep for a few seconds indicating the iron has been switched off.
• To reconnect the iron it is enough changing the position of the iron.
STEAM IRONING
• Set the temperature selector (7) to its maximum position (MAX) by turning it clockwise.
• Before filling the tank with water, set the adjustable steam knob (3) to the off position ( ).
• To fill the tank, always do so with the iron unplugged from the mains.
• Open the filling lid (4) and pour water into the tank using the cup provided.
• Do not go over the MAX indication of the tank (8) to avoid overflowing.
• Replace the lid.
• Connect the iron to the network. The indicator (9) will light up.
• Once the pilot light (9) goes off, move the steam knob (3) to the maximum steam indication ( ) until getting
the desired amount of steam.