11
• Always place the heater in horizontal position and
stand it on a firm solid horizontal base (not over
carpets specially quilted carpets).
• Do not rest the cable on hot parts of the appliance
and avoid to place it in the air output grid.
• This appliance incorporates a safety device
which will disconnect the resistance in case of
overheating. Nevertheless to keep the appliance
refrigerated the fan will not stop.
• The cleaning and maintenance done by users, can
not be done by children without any supervision.
• If the cable were to deteriorate it must be changed
by an Authorised Service Centre.
INSTRUCTIONS OF USE
• Plug the appliance into the mains.
• Turn the thermostat knob (3) clock-wise to the maximum position (MAX).
• Turn the power selector (1) to the desired position. The indicator light (2) will switch on and the fan
heater will start to work.
-
Position : The appliance will work as a fan and only give cold air.
-
Position “I”: Minimum heating power.
-
Position “II”: Maximum heating power.
-
Position 0: Off.
• When the room reaches the desired temperature, turn the thermostat knob (3) anti-clock-wise until
the pilot light (2) goes off and the fan will go off. The thermostat will automatically maintain the
selected temperature.
MAINTENANCE AND CLEANING
• Before you proceed to cleaning ensure the appliance is unplugged.
• Allow to cool and clean with a soft dry cloth.
• It is important to keep the air intake and output grids clean of dust and fluff.
• Do not use chemical or abrasive products, such as metallic scourers, which may deteriorate the
surfaces of the appliance.
ENVIRONMENT PROTECTION
• Dispose the appliance according to the local garbage regulations.
• Never throw it away to the rubbish. So you will help to the improvement of the environment.
