4
Wall mount
1. Remove the screw attaching the bracket to the VESA 75*75 mount.
2. Install the four green plastic wall anchors in a wall and then mount the
bracket to the wall with the four long screws.
3.
Install the VESA 75*75 mount to Hestia Plus with four M3*6 screws.
4.
Hang the Hestia Plus to the bracket.
5.
Attach the bracket to the VESA 75*75 mount from the bottom with the screw that was removed in
step 1.
Getting started
1.
Pull out IO cover to connect power adapter and needed cables and then install IO cover back.
2.
Place power adapter carefully and prevent it from dropping
3.
Connect power cord with power source, system will boot automatically when it is supplied with
Power for the first time.
4.
Screen will be on within few seconds and barcode scanner starts working with notification tone.
Accessory & Installation
MSR card reader installation
1. Pull out cover of MSR card reader from the system
2. Connect the cable of MSR card reader to the reserved connector and make sure it is inserted
properly.
3. Fix MSR with 2 screws we provided.
4. Install MSR cover back and test the MSR.
Barcode Scanner
Barcode scanner is set up in auto mode as default setting. LED will light up when any object shows in
front of barcode scanner within proper distance, and barcode scanner will automatically scan when a
barcode showed within proper distance.
EasySet App
Introduction
EasySet is a configuration tool for Newland’s 1D/2D handheld barcode scanner, fixed mount barcode
scanners and OEM scan engines. Its main features include: