Once we get the whole frame ready, ensure the worksurface is centered
over the frame. and fully tighten all M6x40mm Hex Head to Table Tops,
through each L-Bracket.
Page 5 of 5
INSTALLATION GUIDE
Switch System
6 Person Workstation
Size: 1200mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
09
Once we get the whole frame ready, ensure the worksurface is
centered over the frame. If you are planning to install a divider
screen, leave a 25mm gap between tables.
25mm
07
Directly screw into table tops, using L-Bracket
screws through each L-Bracket.
08
Note:
If you are planning to install Pincer Brackets
like the image to the right, you need to attach these
brackets before continuing.
Note:
It is important to fully tighten all bolts and screws before attaching the top(s) so that the
frame is sufficiently rigid. Failure to do this may affect stability once the tops are attached.
