Page 6 of 7
ASSEMBLY INSTRUCTIONS
Blackjack LShaped
Corner Executive Desk
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Position frame on the main desktop as shown. Screw plastic support in
centre using M5x20mm screws (23), then screw the wrists into underside
of the main desktop using M5x25mm screws (22) .
Position the return leg assemly so wrist is 25mm from end of return.
Fix in place using M5 x 25 screws (22).
The return top rail is usually 1450mm length. Clip plastic supports 100mm
and 500mm from on end of this rail. Screw fix the end support.
Insert return top rail (4) into hole in wrist with plastic supports flat against
underside of dekstop. Stop the rail level with outer edge of wrist.
14
16
13
15
