Page 3 of 4
ASSEMBLY INSTRUCTIONS
Blackjack Executive
Office Desk
Need help!
Call us on
1300 527 665
www.jasonl.com.au
01
03
04
02
Screw the glides into the base of the fixed feet, leaving the glides one
turn from tight (then they can be adjusted easily if the floor is uneven).
Place the leg tube on top of the fixed foot, making sure each small
notch in the bottom of the leg tube is in-line with the bumps on the top
of the fixed foot. Fully tighten to maximum tension the large M10x65mm
bolts with spring and flat washer.
Place the upper wrist on top of the leg tube, making sure each small
notch in the top of the leg tube is in-line with the bumps on the bottom of
the upper wrist. Fully tighten to maximum tension the M10x30mm bolts.
With the legs assembled, place each end of the top rail into the holes
on the side of the upper wrist, making sure they stop before going all
the way through.
