background image

Jason International, Inc.  •  

 

501.771.4477  

 

 

 

Page 5 of 25

 

 

 

 

Customer Service :  800.255.5766 

Copyright © 2018 Jason International, Inc.

FEATURES, CONTROLS AND OPERATING INSTRUCTIONS

INTRODUCTION

This manual contains all of the information needed for 
the proper installation and operation for your Jason bath.  
The bath has been designed to give you years of relaxing 
trouble-free service, provided the unit is maintained and 
operated in accordance with these instructions.

Thoroughly clean and disinfect the unit as described in 
the CLEANING section of the 

USER MAINTENANCE 

INSTRUCTIONS 

section of this owner’s manual before its 

first use and periodically thereafter.

CAUTION:

 Keep hair, towels and clothing away from any 

installed suction fitting whenever the equipment is ON.  
Never operate the equipment with the suction cover off, 
doing so voids the manufacturer’s warranty—it is a safety 
cover designed to eliminate the potential of hair and body 
entrapment.

All Jason baths are pre-plumbed at the factory.

WARNING: Before operating, refer to the instructions 
at the beginning of this owner’s manual pertaining to 
the risk of fire, electric shock or injury to persons.

Filling and Draining

Close the drain and fill the bath with water to the desired 
level (at least two (2) inches (50mm) above the jet). The 
inlet temperature should not exceed 104°F (40°C). When 
bath is in use, turn the unit OFF before draining the water. 
The bath unit and its plumbing are designed to drain after 
each use whether used as a hydrotherapy bath, soaking 
bath, or just taking a shower.

NOTE:

 If the unit fails to operate, check the breaker panel 

to ensure that the circuit breaker is on. Check the GFCI by 
testing and resetting it. If the unit still fails to operate, refer 
to the Trouble Shooting Guide section of this manual. If the 
unit still fails to operate and is out of warranty, contact an 
authorized service technician for repair. If the unit is within 
the warranty period, contact JASON Technical Services at 
800-255-5766. 

DO NOT ATTEMPT TO RESOLVE THE 

PROBLEM.

FEATURES 

Jason offers the finest in soaking hydrotherapy baths but 
also offers the option for more hydrotherapy choices with 
Jason MicroSilk

®

 or AirMasseur

®

 therapy units.  Please 

consult your product configuration label on the front of this 
manual to learn what hydrotherapy experiences await you.

MICROSILK

®

 FEATURES

Jason’s MicroSilk hydrotherapy bath supersaturates the 
water with negatively charged, oxygen-rich microbubbles 
which gives your skin new life. This results in increased 
oxygen levels which promotes healthy skin cell growth, 
neutralizes free radicals and encourages healing of scar 
tissue formation.

MicroSilk

®

 Unit

The MicroSilk unit generates the oxygen-rich microbubbles 
that fill the bath.  MicroSilk units provided on Jason baths 
are factory tested after installation on the bath.

MicroSilk

®

 Port

A strategically placed MicroSilk port is provided for com-
plete enjoyment of your bath.  The port can also be used 
to connect an optional MicroSilk Shower Wand.

Standard Edition MicroSilk

®

 

The Jason Standard Edition MicroSilk hydrotherapy 
includes the Microbubble Generator unit, an electronic 
control and a 20-minute timer.

Premier Edition MicroSilk

®

 

The Jason Premier Edition MicroSilk hydrotherapy pro-
vides all the features of the Standard Edition with the in-
cluded benefits of an LED Chromatherapy mood light and 
an Automatic Ozone Sanitation system.

Signature Edition MicroSilk

®

 

The Jason Signature Edition MicroSilk hydrotherapy 
provides all the benefits of the Premier Edition as well as 
a digital control with LCD-display readout, low water/tem-
perature sensors and Jason’s Bluetooth Sound Immersion 
system.

Summary of Contents for MicroSilk


























Reviews: