Installation _______________________
This section includes information on how to unpack and
position your Jasmine EL34-PP Tube Integrated Amplifier.
After carefully unpacking your Jasmine EL34-PP Tube
Integrated Amplifier, inspect for any shipping damage and call
your dealer immediately if any is found. Do not plug your
Jasmine EL34-PP Tube Integrated Amplifier into any outlet if
you find shipping damage.
Please save all packing materials so the unit can be easily and
safely shipped if the need arises.
Included in the carton, you will find an accessory kit that
contains the following:
Four EL34 tubes
Two 6F2 tubes
AC power cord
One pair of gloves
A screw driver
Each tube is labeled, such as V1, V2, … etc. The same
label also appeared on the top side of the amp.
First of all, place the amp on a solid place, then remove
the tube cover by the screw driver. Unpacking the
tubes, and plug in the according slots.
The tubes are tested and strictly matched before
packing in the factory. To be sure you have plug the
tubes in the right place before powering on the amp.
Otherwise, will reduce the sound quality.
After all tubes are installed, Please re-fixed the tube
cover.
Unpacking
The Accessory Kit
Installing Tubes
