A WILKINSON STAR LIMITED PRODUCT 01-19 ISSUE 1
Automatic protection
The machine has excellent protection functions,
and there is a corresponding code when protection
is enabled.
The machine integrates under-voltage and
overvoltage protection. When the input mains
voltage is unstable and the voltage is too high or
too low, the welder protection disables output and
prevents damage to the welder.
Overheating protection: Due to high ambient
temperature or overloaded use, the temperature
of the internal components is too high the
protection system prevents damage to the welder
due to high temperature.
Overcurrent protection: When the welder exceeds
the design rated output, the welder enables
protection to prevent damage to the welder.
Good product consistency and stable performance
This machine adopts intelligent digital control,
which is insensitive to changes of component
parameters.
The
changes
of
component
parameters will not affect the performance of the
welder. It is insensitive to changes in the
temperature and humidity of the environment.
Therefore, the consistency and stability of the
digital control welders are much better than those
of the traditional welders.
Easy to use interface
Using the internationally accepted graphical
language interface, the main human-machine
interface is simple, intuitive and easy to
understand.
The operation panel layout is convenient for
various user operations.
High quality manual welding can be achieved
Excellent control algorithm significantly improves
manual welding performance: Easier arc striking,
stable welding current, minimal spatter, non-stick,
good weld formation, automatic adaptation to
changes in the length or cross-section of the
welding
cables,
excellent
quality
in
size
specifications.
TIG welding of high requirements can be achieved
The improved digital constant current regulation
technology ensures the low noise and high stability
of the arc in the full specification. In addition, the
sophisticated and mature control algorithm
provides a convenient and practical method for the
user to freely control the current form. The
machine offers four classical TIG arc operation
modes including 2 T, 4 T, cycle and spot welding
which provide a good way for users to realize the
special process requirements.
Remote control
Provides torch control and pedal switch options
and users can select as needed.
