Controls
4
Front view
1.
Overheating LED: Overheating LED on indicates that the temperature
inside the machine is too high and the machine is under overheating
protection status.
2.
Power LED: Power LED on indicates that the power switch of the
machine is on.
3.
MMA/TIG switch: To toggle between MMA and TIG.
4.
"+" Output terminal: To connect the electrode holder.
5.
"-" Output terminal: To connect the work clamp.
6.
Trademark
7.
Welding current knob: To adjust the output current.
8.
Handle
Rear view
9
Power switch
10
Warning label
11
Input cable gland
12
Cooling fan
8
