Troubleshooting and Precautions
4
The most common carrier communication problems
of remote control are unsuccessful communication
or low communication rates. If these problems
occur, please check the following:
1.
Welding cable length is over 100 meters
2.
Welding cable is coiled up. Remove the coils
be extending the welding cable. Avoid excessive
coiling
3.
When the remote control and machine shows
current inconsistency it may be necessary to reset
the internal adjustment.
Precautions
Environment
•
Use the remote control should be carried out
in a relatively dry environment, The air humidity
should generally not exceed 90%.
•
Ambient temperature should be between -10C
to 40C.
•
Do not let the water penetrate into the remote
control.
Avoid use in dusty areas or corrosive atmospheres
•
When using the remote control at high levels,
ensure that it is secured to prevent falling to avoid
injury.
•
Avoid connection to a work piece with a
temperature higher than 100 °.
Over voltage
The remote control must be used within the
required voltage range of 50 - 100V.
If the voltage does not meet the requirements or
voltage exceeds the upper limit of the remote
control, please do not use the remote control to
avoid permanent damage occurring.
Physical damage
The remote control contains sophisticated
electronic circuitry, care should be taken to avoid
physical damage which could cause short-circuiting
in the remote control, or other permanent damage
6