background image

10

Programming Combo Device Codes

Some.Combo.devices.(e.g..TV/VCR,.TV/DVD,.DVD/VCR,.etc.).will.
require.you.to.set.up.two.different.Mode.buttons.to.control.both.
parts.of.the.Combo.device..For.example,.if.you.have.a.TV/DVD.
Combo,.you.might.need.to.set.up.one.code.under.the.

TV 

button.to.

control.the.TV.part.AND.a.separate.code.(under.any.other.Mode.
button).to.control.the.DVD.part.

Controlling Combo Devices

Some.Combo.devices.(e.g..TV/VCR,.TV/DVD,.DVD/VCR,.etc.).have.
separate.buttons.on.the.original.remote.to.select.the.part.of.the.
Combo.device.to.be.controlled..For.example,.if.your.Combo.device.
is.a.DVD/VCR.then.its.original.remote.might.have.separate.DVD.
and.VCR.buttons.for.selection.of.the.Combo.part.you.would.control..
The.equivalent.button.functions.can.be.found.on.your.new.remote.
by.using.the.device.Mode.and.

SETUP 

buttons...

Referring.to.“Programming.with.Code.Search”.on.page.8,.setup.
a.device.Mode.(e.g..

DVD)

.with.the.correct.code.for.your.Combo.

device..Assuming.the.DVD/VCR.Combo.device.is.the.example.and.
its.code.is.programmed.under.

DVD 

Mode,.press.and.hold.the.

DVD

.

Mode.button.for.more.than.one.second.to.send.the.DVD.button.
command..To.send.the.VCR.button.command,.quickly.press.and.
release.the.

SETUP 

button.followed.by.pressing.and.releasing.

the.

DVD

.Mode.button..This.method.can.be.applied.similarly.to.

all.Combo.devices.(e.g..TV/VCR,.TV/DVD,.DVD/VCR,.etc.).and.is.
available.for.all.Modes..Note.this.feature.is.not.supported.by.all.
codes..

Controlling Devices Requiring Separate Power On and Off 

Buttons

Some.devices.(e.g..certain.RCA.TVs).require.separate.Power.On.and.
Power.Off.buttons.to.turn.the.device.on.and.off..The.equivalent.
button.functions.can.be.found.on.your.new.remote.by.using.the.
device.Mode.and.

ON-OFF 

buttons..Referring.to.“Programming.with.

Code.Search”.on.page.8,.setup.a.device.Mode.(e.g..

TV)

.with.the.

correct.code.for.your.device..

Assuming.a.TV.device.is.the.example.and.its.code.is.programmed.
under.

TV

.Mode,.to.turn.your.TV.on,.press.and.hold.the.

TV

.Mode.

button.for.more.than.one.second.to.transmit.the.Power.On.button.
command..

  Setup, cont.

Summary of Contents for GE 20626
















Reviews: