7
Note:
If your TV has only 300-ohm VHF screw terminals,
use a 75-ohm-to-300-ohm matching transformer to
complete the connection.
2.
Plug the RF Modulator’s power cord into a standard AC
outlet.
OPERATION
1.
Turn on the TV and set it to either Channel 3 or 4.
whichever is not used for regular broadcasts in your
area.
6
If your TV is already connected to another VHF input
source (such as cable, an antenna, or a VCR, for
example), disconnect the VHF input source’s 75-ohm
cable from the TV’s 75-ohme VHF/UHF terminal, and
reconnect it to the RF Modulator’s ANT IN terminal.
Then connect a 75-ohm coaxial cable between the TO
TV terminal on the RF Modulator and the 75-ohm
VHF/UHF terminal on your TV.
If your TV is not already connected to another VHF
source, connect a 75-ohm coaxial cable between to the
TO TV terminal on the RF modulator and the75-ohm
VHF/UHF terminal on your TV.
RF Modulator Book 9/17/03 1:28 PM Page 6
Summary of Contents for AV93299
Page 1: ......
