18
PTZ settings: Adjust and control the camera with external PTZ device.
Protocols: default PELCO-D, support PELCO-D.PELCO-
Bit rate: under RS485 port: 2400bps,4800bps,9600bps,38400bps,57600bps
Channel-Address: Channel one-Device address
Channe2-Address: Channel two-Device address
Channe3-Address: Channel three-Device address
Channe4-Address: Channel four-Device address
System Info:
Display DVR hardware code number
，
software version information( only view,
couldn’t be changed)
；
Reset the Factory Settings
Device encoding: only for this DVR, the code is unique.
Software version: the version No. of DVR software.
IMIE: IMIE No. of 3G network or module
Strength Of 3G signal: strength value:99, unknown: 0-31
Strength Of GPS signal: AA-BB(AA: GPS No.;BB: GPS strength. Show signal strength of
max.3
satellite each cycling time.
Reset the Factory Settings:
