background image

pg 12 of 12

MODEL 400

PRODUCTS CORPORATION

33 ANDERSON ROAD, MIDDLETOWN, CONNECTICUT 06457--4926
UNITED STATES OF AMERICA E--MAIL. j

[email protected]

FAX 860--347--6978 TEL. 860--347--7271 WWW.

jarvisproducts.com

JARVIS

6205005:::.

®

GENERAL SAFETY INSTRUCTIONS

For Operators, Employers and Maintenance Personnel

READ ALL INSTRUCTIONS BEFORE USING TOOL AND SAVE THEM FOR FUTURE REFERENCE

ATTENTION

:

When using electric tools, basic safety precautions should always be followed to reduce
the risk of potentially dangerous tools and personal injury, including the following:

Working Precautions:

1.

KNOW YOUR JARVIS WELLSAW.

Read and understand safety notices, manuals and instructions on the

Jarvis

Wellsaw in

the literature provided. Become familiar with the

Jarvis

Wellsaw, its dangers, limitations

and applications.

2.

USE THE RIGHT TOOL AND ATTACHMENTS.

Select the proper tool to do the job. The

Jarvis

Wellsaw is designed for meat and bone

cutting; wood cutting; non--woven and geo--textile cutting. Do not use the

Jarvis

Wellsaw

for non--intended purposes.

3.

KEEP WORK AREAS CLEAN AND WELL LIT.

Cluttered, oily and poorly lit work areas invite accidents.

Keep visitors a safe distance from the work areas.

4.

AVOID DANGEROUS ENVIRONMENTS.

Do not expose the power tool to rain.

Do not use the tool in presence of flammable liquids or gases.

5.

WEAR PROPER APPAREL.

Avoid being pulled by moving parts of the

Jarvis

Wellsaw. Do not wear loose clothing or

dangling objects. Restrain long hair.

6.

MAINTAIN THE JARVIS WELLSAW AND ACCESSORIES WITH CARE.

Keep the

Jarvis

Wellsaw sharp and clean for the best and safest performance.

Follow the instructions for lubricating and changing the blades.

Inspect the

Jarvis

Wellsaw regularly. If the

Jarvis

Wellsaw is malfunctioning, remove it

from service and report any problems to your supervisor.

Keep the handles dry, clean and free from oil and grease.

7.

STAY ALERT.

Watch what you are doing and use common sense.

PRODUCTS CORPORATION

PRODUCTS CORPORATION

33 ANDERSON ROAD, MIDDLETOWN, CONNECTICUT 06457--4926
UNITED STATES OF AMERICA E--MAIL. j

[email protected]

FAX 860--347--6978 TEL. 860--347--7271 WWW.

jarvisproducts.com

®

JARVIS

6205005:::.

Summary of Contents for Wellsaw 400













Reviews: