WARNING AND PRECAUTIONS
WARNING:
To prevent fire or shock hazard, do not expose this
unit to rain or moisture.
WARNING:
Do not place this unit directly onto furniture
surfaces with any type of soft, porous, or sensitive finish. As
with any rubber compound made with oils, the feet could cause
marks or staining where the feet reside. We recommend using a
protective barrier such as cloth or a piece of a glass between
the unit and the surface to reduce the risk of damage and/or
staining.
WARNING:
Lithium batteries, like all rechargeable batteries
are recyclable and should be recycled or disposed of in normal
household waste. Contact your local government for disposal or
recycling practices in your area. They should be incinerated
since they might explode.
NOTE:
This device uses an internal rechargeable lithium-ion
battery that should last the lifetime of the device. If you
suspect your battery may be dead after several attempts to
charge, please visit www.jarvmobile.com for support.
Never disassemble the unit or attempt to remove the battery as
that could cause leakage of an electrolyte substance
FCC WARNINGS
WARNING:
Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15
of the FCC rules. These limits are designed to provide
reasonable protections against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment on and off, the user is encouraged to try
to correct the interference by one or more of the following
measures.
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected
08
