User Manual
POD1605
Foot Pod Sensor
2
Download and Install i-gotU Sports
https://market.android.com/details?id=com.mobileaction.isports
Supported Devices:
Please visit our manufacturers website for a complete list of
Supported Apps and Compatible devices
http://www.jarvmobile.com/support.asp
Notes:
Although the device is useable in the rain, it is prohibited to be
used under water.
Please do not use any corrosive chemical to clean the device.
Bluetooth is disabled by default. Bluetooth will be activated
automatically upon detection of any sensor movement.
1.
2.
3.
For Android phone users, please download i-gotU Sports from Google Play.
http://appstore.com/mobileactiontechnologyinc/igotusports
For iOS phone users, please download i-gotU Sports from App Store.
QR code for iOS
phones
QR code for
Android phones
1.
2.
1.
2.
3.
4.
5.
6.
Step 1. Set up personal profile
Open i-gotU Sports app on your phone, and tap on
Home
at
the upper left corner.
Select
[Settings]
, and fill in your personal information under
[Profile]
section, including Name, Gender, Height, Weight and Age.
Step 2. Scan for device and complete device calibration
Open i-gotU Sports app on your phone, and tap on
Home
at
the upper left corner.
Select
[Sensor]
, and the app will start device search. Once your
device is found, tap on
the name of
BLE Footpod
shown in the
section of Detected sensor(s) to get connected, and tap on
[Calibration]
afterwards to proceed with device calibration. (To
start with calibration, you’ll be guided via a wizard. Follow what’s
stated on the screen to complete the procedures.)
Properly install your device by either placing it in the shoe or on the
shoe as illustrated on the screen. Please stand still while placing the
device, then tap on
[Next]
to continue.
Stand on your tiptoe as illustrated. Tap on
[Next]
to continue.
Calibration is now complete, and i-gotU Sports has detected the position
of your device as illustrated on the screen.
You may now start using i-gotU Sports with the device installed.
Important Notice:
In order to ensure the accuracy of detection, the device must be calibrated every
time it is installed.
Battery Change
Use a screw driver to loosen the screws on the battery cover.
Please have the screws kept somewhere.
Remove the battery cover.
Insert an CR2032 coin battery.
Close it with the battery cover.
Please insert the battery with the positive electrode
facing down.
Please make sure the screws on the battery cover are
securely fastened, in case of any water penetration.
1.
2.
Getting Started : To get started with i-gotU Sports, please complete the following settings:
Important Notice
+
