Page 3
LED
Mode
Description
Left Tooth
Power ON
White LED STEADY ON for 2 seconds
Left Tooth
Power OFF
Red LED flashes once
Right Tooth
A2DP AAC, SBC, - Streaming
Blue LED steady ON
Right Tooth
Pairing Mode
Blue LED Blinking
Right Tooth
Device connected
Blue LED steady ON
Right Tooth
Line-in mode
Bluet LED is ON
Left Tooth
Low Battery Indicator
Red LED is flashing
Left Tooth
Battery Charging
Green LED is steady ON
Input Mode
AeroSkull Nano® supports 2 kinds of input mode Bluetooth and Line-in mode
Bluetooth mode
What do you need:
A bluetooth device
1 AeroSkull Nano®
To enable Bluetooth turn On AeroSkull Nano® the product will automatically go into pairing mode if no other device is connected. Then access
Bluetooth on your device and go to the list of available devices. Look for
between the list of the available devices then select
AeroSkull Nano®
AeroSkull Nano® to connect to the speaker. If AeroSkull Nano® does not appear on the list, please turn your speaker Off and then back On.
Once you have successfully connected to the AeroSkull Nano®, the Blue LED Light Indicator located on the tooth of the AeroSkull Nano® will
show a steady blue colour, you will now be able to stream audio.
Line-in mode
What do you need:
1 AeroSkull Nano®
a 3.5 mm audio cable
an audio device with Line out 3.5 mm port
To enable line-in mode you can connect a 3.5mm jack to the AeroSkull Nano® and play audio directly from your favourite device. Line-in port is
located at the back of the AeroSkull Nano® next to the Micro USB port.
(image: Line-in at the back of the AeroSkull Nano®)
Maintenance and Care
Maintenance may include periodically cleaning the AeroSkull Nano®.
8.1. Cleaning
Turn off the AeroSkull Nano® and unplug it before cleaning.To clean the exterior, use a soft, dry cloth.
DO NOT USE SOLVENTS OR SPRAYS.
DO NOT ALLOW LIQUIDS TO SPILL OR OBJECTS TO DROP INTO ANY AeroSkull Nano® OPENING.
8.3. Battery precautions
The battery must not be open.
The battery must not be short circuit.
