Update procedure
Known issues / FAQ / Media contents
How to verify Software version
UPDATE PROCEDURE
PREFACE BY MUSICLIFE LTD.
PREFACE BY JEAN-MICHEL JARRE
IN THE BOX
PRODUCT DESCRIPTION OF THE AEROSKULL HD®
AEROSKULL HD® QUICK START
AEROSKULL HD® REMOTE CONTROLL
OPERATING THE AEROSKULL HD®
VOLUME CONTROL
LED LIGHT INDICATOR
INPUT MODE
OPERATING THE REMOTE CONTROL
MAINTENANCE AND CARE
FIRST HELP BEFORE ASSISTANCE
SAFETY INSTRUCTIONS
APPENDIX I – COMPATIBLE DOCKING DEVICES
APPENDIX II – AEROSKULL HD® GUARANTEE
APPENDIX III – PRODUCT QUESTIONS & ANSWERS
APPENDIX IV - FIRMWARE UPGRADE
APPENDIX V – TRADEMARKS
AeroSkull HD
For the steps of performing USB firmware update for MCU.
• Plug the power supply into the unit.
• Press the power button and hold it down for 5 seconds.
• Release the button as soon as the white LED located between the glasses will flash slowly (~1Hz)
• Connect the Thumb drive (USB Stick) containing the ".hex" file to the Micro USB - USB OTG cable.
• Connect the OTG Cable to the Micro USB port of the AeroSkull HD
• The Blue and White LED will flash alternatively until the software upgrade it completed.
• Wait until the unit is up again and the LEDs stop flashing, the new firmware should be installed at this point.
