3
Programming and setting of the hand-held radio transmitter
Technical data and scope of delivery
1 First, set the respective radio receiver or wireless motor to the “TEACH” mode and follow the applicable instructions.
2 Within 10 seconds, press the OPEN and CLOSE button on your hand-held transmitter simultaneously and then press the STOP button briefly.
Next, press the STOP button.
If the “TEACH” process was successful, it is acknowledged by the brief vibration of the tubular motor that is attached to the radio receiver, or by
the vibration of the wireless motor Now you can use the OPEN/STOP/CLOSE button to activate the motor on your transmitter.
Follow the instructions
in order to set the receiver in
“TEACH” mode
Press the OPEN/CLOSE
button simultaneously,
subsequently pressed the
STOP button.
Motor vibrates
Note:
If you would like to operate additional receivers with this transmitter, proceed as described above.
Each button must be depressed for approx. 1 second!