3-2 Award BIOS setup
Award’s BIOS ROM has a built-in Setup program that allows users
to modify the basic system configuration. This type of information is
stored in battery-backed CMOS RAM so that it retains the Setup
information when the power is turned off.
Power on the computer and press <Del> immediately. This will allow
you to enter Setup.
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
STANDARD CMOS SETUP
BIOS FEATURES SETUP
CHIPSET FEATURES SETUP
POWER MANAGEMENT SETUP
PNP/PCI CONFIGURATION
LOAD BIOS DEFAULTS
LOAD SETUP DEFAULTS
INTEGRATED PERIPHERALS
SUPERVISOR PASSWORD
USER PASSWORD
IDE HDD AUTO DETECTION
SAVE & EXIT SETUP
EXIT WITHOUT SAVING
Esc : Quit F10 : Save & Exit Setup
↑ ↓ → ← : Select Item (Shift) F2 : Change Color
Follow the prompt you can config each item as your requirement.
Chapter4 i
nstalling system dirver
4-1 System Drivers Installation
This session introduces the ways to install the drivers under
Windows/98SE and windows/NT ,and linux platforms for system
peripherals,such like VGA display, Touch Panel, Ethernet, ……..etc..
For more details about installation under each platform , please refer
the document files on each attached driver diskette.
The detail should be added in the future
Chapter
5:jump setting of the mainboard
5-1 navigating the mainboard
May
it helpful to you for hardware maintaining if you can know some special
jumper setting of the main board .Figure 9 and Figture10 which is the
the up and back placement of the mainboard . It issues all the positions
of the useful jumpers