JARLTECH 8010M, Operation Manual

Page: 32 / 52

32
Custom Programming
Step 10: Program Jarltech Keyboard
Once you have completed and saved the data input which
customizes the Jarltech keyboard to suit your application
requirements, you are ready to program the keyboard. Scroll
[
®
] to the PROGRAMMING menu (shown in Diagram 3.18).
The Jarltech keyboard may be programmed via the RS232 port
or the IBM keyboard port.
If you are programming via the RS232 port, connect the
programming cable to the HOST port on the Jarltech key-
board and to one of the RS232 communication ports of your
computer. Select PROGRAM KEYBOARD VIA RS232 and
press [ENTER]. Select the communication port which
matches your computer connection and press [ENTER]. A
box similar to that in Diagram 3.19 will appear. Press the
programming switch on the rear panel of the 8010 keyboard.
The screen will change to a display of the address and data
indicating that programming is underway. The keyboard will
beep to indicate that the programming was successful.