background image

9

8

CLOSE THE UMBRELLA

 · Bring canopy to 0° (horizontal) tilt position.

 · Insert crank handle in “close / open” socket.

 · Turn adjustment knob counter clockwise and begin cranking handle counter 

clockwise.

 · Canopy will close and umbrella will slide down mast simultaneously by 

operating the crank handle. 

Note: stop turning crank when umbrella is fully 

closed.

 Doing so may cause damage to umbrella.

 · Turn adjustment knob clockwise to secure umbrella in place.

FOLD CANOPY
The 100% solution dyed canopy will last longer if you fold it as it was packed 

and shipped. This technique is similar to the way a parachute is folded and is 

especially important when folding the canopy for seasonal storage or when left in 

the closed position for an extended period of time.

Using this technique at all times will significantly extend the life of the canopy.

 · When the canopy has been fully lowered, stand in front of the canopy structure 

and begin the folding process by pulling out two panels opposite the mast.

 · Once rolled tight, pull adjacent panels out one at a time and fold to the center, 

alternating sides until all the panels have been pulled out from the arms and 

folded into the center.

 · Wrap provided strap around canopy to secure.

 · When not in use, cover umbrella with provided protective cover. 

Slide internal mast stem cover over internal stem.

protective cover

Summary of Contents for JCP.3 Series








Reviews: