5
4
ASSEMBLY INSTRUCTIONS
Two-person team is recommended for assembly.
ASSAMBLE CANOPY STRUCTURES
· Lay mast on soft clean surface. Remove bolt and nut from mast.
Slide out internal stem from bottom of mast and set aside.
· Attach main support arm to mast cap. Secure with bolt and nut.
Repeat step as necessary.
· Attach finial to top of each canopy structure.
· Slide internal stem back into bottom of mast.
internal
stem
bolt
slider car
guide
nut
crank
mechanism
slider car
assembly
· Locate canopy structure and slider car guide. Attach slider car guide to
grooves on back side of slider car assembly. Repeat step for each canopy
structure purchased.
· From bottom of mast, insert slider car wheels onto 1 side of mast.
Repeat for the other canopy structure.
crank mechanism
slider car wheels
bottom of mast
main support arm
mast cap
mast
nut
bolt
internal stem