background image

Jardine Enterprise warrants its product to be free from defects in material and workmanship and 
agrees to remedy any such defect.  This warranty covers 1 year from the date of original purchase.  
This warranty is valid only upon presentation of proof of purchase.  This is solely limited to the 
repair or replacement of defective furniture components and no assembly labor is included.  This 
warranty does not apply to any product which has been improperly assembled, subjected to 
misuse or abuse or which has been altered or repaired in any way.  This warranty gives you 
specific legal rights and you may also have other rights which vary from State to State.

If the crib is to be stored, store in cool dry place and carefully package all original hardware to 
protect from loss.

MAINTENANCE          

Check bolts/screws periodically and tighten them if necessary.

 LIMITED WARRANTY

          WARNING:  Should this product become 

damaged, and/or components are broken or missing, 

DO NOT USE.

CARE AND CLEANING             

Dust regularly with a soft, lint-free cloth to prevent soil build-up.  A damp cloth may be used 
occasionally to clean surface. Dry immediately. Do not use any abrasives that may damage finish. 
Excessive exposure to sunlight and extreme changes in temperature and moisture can damage 
wood furniture.

Summary of Contents for CAPRI 0108L00








Reviews: