ASSEMBLY INSTURCTIONS
DJ104BC 4 IN 1 CRIB
Thank you for purchasing this quality product. Be sure to check all packing material carefully
for small parts, which may have come loose inside the carton during shipment. Identify and
count all parts and compare with the parts list above.
NOTE: WHEN INSERTING SCREWS TURN CLOCKWISE UNTIL TIGHT. THEN LOOSEN
1/2-3/4 OF A TURN. AFTER CRIB IS COMPLETELY ASSEMBLED, RETURN TO EACH
SCREW AND TIGHTEN. USE WAX OR SOAP ON ALL SCREWS TO FACILITATE ASSEMBLY.
STEP 2.
TO ATTACH THE RIGHT END PANEL
ASSEMBLY (PARTS G2 & H2) ONTO
THE HEADBOARD (PART I),
USE 2 BOLTS (PART B) AND WRENCH
(PART C) PROVIDED TO SECURE THE
RIGHT END PANEL ASSEMBLY
(PARTS G2 &H2) TO THE HEAD-
BOARD (PART I). REPEAT THIS STEP
TO ASSEMBLE THE LEFT END PANEL
ASSEMBLY (PARTS G1 & H1) AND
HEADBOARD (PART I).
C
B
H1
H2
B
I
B
B
STEP 1:
TO ATTACH THE RIGHT FRONT POST
(PART H2) TO THE RIGHT END
PANEL (PART G2) ,USE 2
BOLTS (PART B) AND WRENCH
(PART C) PROVIDED TO SECURE THE
RIGHT END PANEL (PART G2) AND RIGHT
FRONT POST (PART H2). REPEAT THIS
STEP FOR THE LEFT FRONT POST
(PART H1) AND LEFT END PANEL (PART G1).
PLEASE MAKE SURE THAT THE TOP OF THE
POST IS AT THE LOWEST POSITION TO BE
CONNECTED TO THE TOP OF THE RA1L OF
THE END PANEL WHILE SCREWING
B
G1
G2
G1
G2
C
H1
H2
I
