12. Adjust the disconnect screw (5) using a 5/64” hex. Turn it so when the hammer is in the cocked position you can push
down on the hammer and feel it brush against the disconnect. (Small amounts of screw rotation make large changes.)
13. Install the pin keeper provided into the lower receiver.
14. Adjust the safety fit screw (8) so there is NO movement of the trigger when the safety is on. (Safe must be removed for
adjustment) Install safety when this is adjusted properly.
15. Perform all function and safety functions. Make sure all are correct. Reassemble gun when completed.
16. Allow thread lock to dry 24 hours before using.
Jard, Inc.
3149 Nest Ave. – Sheldon, IA 51201
Phone: 712-324-7409 – Email: [email protected]
JARD FAL Assembly Parts Breakdown List
Summary of Contents for FAL
Page 4: ...www jardinc com...
