Owner’s Manual
Version C
Adapt4 Charging Stations
4
3
Connect the USB-C Charging Cables
Plug the supplied USB-C to USB-C
cables into the four charging ports on
the front of the Quick-Sense module.
It is recommended to only use the
supplied cables.
(extra cables may be purchased from JAR Systems)
Connect the Power Cable
Plug the power cable into the back of
the station. Then plug the other end of
the cable into the wall outlet
Transporting the Station
Disconnect the power cable from the
wall outlet and then remove the other
end from the back of the station.
Bundle the power cable and transport
it separately. While carrying the
charging station by the handle, place
your free hand underneath the station
to best support the weight.
Using the Quick-Sense USB-C Module
How it Works
Powered by JAR Systems’ proprietary Quick-Sense charging
technology, the Adapt4 USB-C automatically senses and
adjusts the power supply to meet the needs of each
individual device ranging from to 2.5W to 45W. The system
delivers a fast, efficient, balanced charge and protects
against power surges and spikes. LED lights for each port
change color when a device is drawing power.
USB-C
Charging Cables
Removable
Power Cable
When moving
the Adapt4,
use the handle
and place the
other hand
underneath.
Getting Started
Removing the Door (optional)
The door can be disconnected from the station
by removing the four bolts connecting the door
hinge to the inside of the frame of the station.
This allows for open and unimpeded use of the
charging station.
Preventing Removal of the USB-C Module
The Adapt4 comes with two bolts installed which
prevents removal of the USB-C module when the
door is open or not present. The bolts can be
removed with the wrench to allow the module to
be easily removed from the station.
Preventing the Station from Being
Transported (optional)
Adapt4 stations feature a Kensington
®
Security
Slot
™
and a security loop which enables users
to utilize a locking cable to secure the station in
place. (locking cables not included).
Wall Mounting Bracket (optional, not included)
Mount the bracket using included hardware
to fasten the taller side of the bracket to the
wall. Attach the provided hardware to one
side of the station for it to slide into notches
in the mounting bracket and secure into the
bracket the with the screws through the front.
WARNING: Failure to provide adequate structural strength
for this mounting system can result in serious personal injury
or damage to equipment. It is the installer’s responsibility
to make sure the structure to which this mounting system
is attached can support five times the combined weight of
all equipment. Reinforce the structure as required before
installing the mounting system. Always ensure that proper
hardware is used for the wall surface type. Never operate
this mounting system if it is damaged. Contact JAR Systems
for replacement or repair.
Wall Mounting
Bracket
notches
Secure
Adapt4
with two
screws
to the
bracket.
Removable front
door hinges to
unbolt.
Wrench
included
to remove
bolts.
Kensington
Security Slot
and Loop
(Backside lower corner)
