1
2
Read Instructions carefully.
Lay out all of the components on a soft surface
Check no parts are missing.
as if you were preparing to do a jigsaw puzzle.
3
4
Carefully identify each component, especially
Separate and identify each component from the
those that are similar. The most common mistake
hardware pack and rest each one in its proper
is getting things back to front.
location before fastening.
5
6
DO NOT
fully tighten screws (leave slightly
If glue is required DO NOT set until you are
loose). When the items is fully assembled
certain that the parts belong together.
tighten the screws - but do not over tighten.
WARNING
FAILURE TO FOLLOW THESE BASIC STEPS CAN LEAD TO DAMAGE
THAT IS NOT COVERED BY YOUR WARRANTY
Page 2
