jaquar Alaska FSBT177542X, Installation Manual

Page: 16 / 16

Jaquar bathtubs are manufactured to the strictest standards to ensure quality
performance and full customer satisfaction at all times. Each and every one of our
bathtubs is assembled and tested before leaving the factory.
Al
l plumbing installation work should be effected in compliance with the national
regulations concerning plumbing installations in buildings. The system must only
be installed by qualified professionals.
Jaquar bathtubs declines all responsibilities in the event of improper installation.
The maximum recommended water hardness for the range of baths is 13ºe
(English degree of hardness/250ppm). The bathtubs are not designed to be used
for seaweed, mud or seawater treatments, etc.
Th
ere is an increased risk of fall when the surface of most baths is wet and
therefore slippery. This is particularly true when soap, shampoo, bath oils and
other similar products are used. Users of baths must be aware of this fact.
NB: Before proceeding with the installation, check that all the parts supplied are in
perfect condition. Notify the carrier immediately if this is not the case.
CRESCENT/1
1/21
jaquar.com