Japan Radio Co. JUE-60KA, Instruction Manual

Page: 40 / 146

Section 3 Components 3-4
No. Name Function outline Supplement
(4) RX Modem
connector Used for the connection of a RX
coaxial cable of X7 modem. Connector shape: SMA
connector
Coaxial conversion cable is
attached to connect with
coaxial cable.
(5) ADE- BDE (RX)
connector Used for the connection of a RX
coaxial cable of ADE. Connector shape: TNC
connector (ADE: N
connector)
Coaxial conversion cable is
attached to connect with
coaxial cable.
(6) Fan Cools BDE. The fan rotational speed
fluctuates according to the
temperature inside of the
equipment.
(7) AC power connector Connects the cable that supplies
power to BDE. AC inlet 3P
(8) Earth terminal screw Used for grounding. The following
effects are available.
• Reduction of impact of lightning
damage
• Prevention of electrostatic
discharge
• Suppression of noise generated
externally
(9) Fuse Melts down when overcurrent is
detected and shuts out the circuit.
Replacement procedure: Loosen the
folder head in the anti-clockwise
direction by 90 degrees with a slotted
screwdriver. When the folder is
ejected, remove the folder. Replace
the fuse to a new one and set it in the
folder. Insert the folder and tighten it
in the clockwise direction.
Rated current: 6 A
Quantity: 2