emWEB-15WT (
Hardware and Software Manual
)
•
Operating System and Drivers
5 - 17
Rev. 1.1
© Janz Tec AG
figure 6: Webmin overview
On the first boot the system has to be configured for the kiosk mode. This includes to define a default
homepage which should be loaded after starting the operating system.
For configuring the kiosk mode, open the “Kiosk Configuration” page on the webmin service. Have a
look to
Fehler! Verweisquelle konnte nicht gefunden werden.
. After setting up the homepage, note
that the changes has to be committed to the filesystem. Choose the “reboot-commit now” button to
apply the configuration.
figure 7: webmin kiosk mode
Once the kiosk mode is enabled and a default page is shown at the start up, there are following ways
to (re-)configure the emWEB-15WT.
1. GUI based modification
Apply a keyboard to the emWEB-15WT and press
“
Ctr
l” + “Shift” + “T”
. This opens
a new browser tab and show the navigation bar.
Open “http://127.0.0.1/”
2. Command line based modification
Apply a keyboard to the emWEB-15WT and press
“Ctrl” + “Alt” + “F1”
(Alternatively
open a SSH shell).
After pressing, a shell will appear and gives access with the specified credentials. For
modifying the homepage, edit the file
“/etc/kiosk.conf”
