Page 5
Connector Description
Note:
To access dipswitches and connectors, open the Cellular Gateway case by unfastening the front screw using
a Phillips screwdriver and removing the lid.
Note:
Connect to RS232 (J10) to use as a data pass through. Distance limitation is approximately 1,000 feet. Actual
numbers will vary based on the cable and gauge used.
J8 - CANBUS:
CANBUS can only be used with specific Avire products. See supplemental manual.
J2 - External Antenna:
Connect the provided external antenna to the J2 connector. Only antennas approved by
Janus should be used otherwise the Cellular Gateway may not function properly and may be damaged.
DESCRIPTION
J2
EXTERNAL ANTENNA
J3
BATTERY
J6
POWER SUPPLY
J8
CANBUS
J9/J1A PHONE LINE
J10
RS232 CONNECTOR
J3 - BATTERY
J6 - POWER SUPPLY
J9 / J1A - PHONE LINE (SLIC)
Supply Voltage:
100-240vac, 60/60 Hz
PIN
FUNCTION
SIGNAL
1
+12
POSITIVE
2
GND
NEGATIVE
PIN
FUNCTION
SIGNAL
1
L
LIVE
3
N
NEUTRAL
PIN
FUNCTION
SIGNAL
1
L1
TIP
2
L2
RING
