Terminus T3 User Guide JA19-UM
Page 13 Rev: 00 Date: 05/25/17
© Copyright 2017 Janus Remote Communications
Specifications subject to change without notice
All Rights Reserved See website for latest revision. Not intended for life support applications.
Getting started with the T3 continued
GPS continued
EVDO910T3
The data can be acquired in two methods.
Method 1:
•
Send command AT$GPSP=1<cr>
•
Send command AT$GPSACP<cr>
$GPSACP can retrieve GPS data at any point when $GPSP=1
Method 2:
•
Configure Unsolicited NMEA Data:
•
Send command to enable NMEA stream
AT$GPSNMUN=<enable><gga><gll><gsa><gsv><rmc><vtg><cr>
Select parameter “3” to enable or “0” to disable for your NMEA stream requirements
EXAMPLE: AT$GPSNMUN=3,1,1,1,1,1,1
•
Start NMEA Stream:
Send command AT$GPSP=1<cr>
•
End NMEA Stream:
Send command AT$GPSP=0<cr>
