LOKUS O - Standalone controller
5/2014
Black line
www.codeks.eu
Switch from Wiegand 26-bit to controller:
Right after turning the power supply on, when the controller has
both LEDs lit, approach a user card and remove it after 9 beeps.
Function 13) Delete all
Reset/delete all data to default.
Setup:
Approach the master card and remove it after 13 double beeps.
Within a period of three seconds approach a user card. This will
delete all data and reset the controller to default settings. The
controller will confirm this with a long beep, followed by a double
beep.
Default settings:
A three-second pulse, five-second open time, four-second pre-
alarm time, door switch and push button have NO contact; output
is set for fail secure el. strike. The controller is in standalone
mode.
ORDERING CODES
LOKUS [box]-[card]
Box:
O
Card:
1
– reading frequency 125kHz (cards)
Code
Specification
LOKUS O-1
Standalone controller in
O
box, Frequency
125kHz
OTHER
Warranty only applies when the Lokus controller is powered with
the power supply form the Spider family.
Please read through our warranty and disclaimer statements.
Connection scheme and additional support for the use of this
product can be found on:
CONTACT:
Jantar d.o.o.
Kranjska cesta 24
4202 Naklo
SLOVENIA
mail: