Janssens KATHEDRAL, Mounting Instructions

Page: 2 / 75

P
RODUCT
I
NFORMATION
Dear customer
Thank you for buying a high-quality aluminium greenhouse.
R
EMARKS
This manual is intended to be a guidance, showing all kind of standard-solutions that can be useful during mounting.
Unlike the other models in our range, this type of house is NOT designed to be a build-it-yourself-kit, it has to be
mounted by experienced builders who are familiar with these products and their assembly!
This greenhouse is designed for cultivation of plants/flowers. Therefore leakage, water drops and condensation inside
the building are allowed. The building may only be entered by competent persons during cultivation or maintenance.
Aluminium profiles that are not painted may show black stains, these stains are not a production error: they can be easily
removed with a aluminium cleaner available at every good drugstore. The rubber strips have been treated with oil/
silicone on the interior to facilitate the assembly. The building should be mounted on a solid concrete foundation deep
enough to get a solid and frost-free ground. During winter the roof has to be cleared of snow or supported in a suitable
way. The greenhouse should be built in a location protected from strong winds. Protective gear (such as protective
gloves) should be used during mounting in order to avoid injuries. One should at all times pay attention to the local
building regulations.
A
SSEMBLY ORDER
The assembly procedure is the same for all our greenhouses.
- Sorting of the profiles according the model.
- Mounting of the complete aluminium construction.
- Leveling of the construction using a waterlevel.
- Securing the building to the ground
- Glazing.
R
EQUIRED TOOLS
Socket wrench nr. 10 or spanner nr. 10, water-level, screwdriver, drilling machine + drill 4.2 mm, scissors (to cut the
rubber).
We reserve the right to change the construction without prior notice!