1. Measure the distance between stove top
and the bottom of range hood. A distance
between 28” to 31” is required.
Make sure the range hood is level and not
tilted.
2. Mark the locations of the
Hanging Bracket
Holes
(of the range hood body) on the wall.
Make sure your mounting points are leveled
when you mark them.
It is recommended to
install the hood directly into wood sup-
ports.
3. Place aside all equipment, locate marked
regions, drill two holes in the marked region,
then insert the two
Wall Anchors
(part C)
directly into the wall.
4. Hand fasten two
Type “M” screws
(part D)
with gaskets
(part D) into Wall Anchors, leav-
ing a small portion of the screws remaining
outside of the wall.
5. Raise the
Hood Body
and hang it onto the
screws on the wall.
6. Align and install the
Top Bar
close to the
ceiling.
Make sure that the
Top Bar
is in line with the
Hanging Bracket
of the range hood below
and its height isn't exceeding the maximum
height of the
Exhaust Duct Cover (31.5in /
80cm).
INSTALL THE RANGE HOOD:
Hanging
Bracket
Holes
Screw
Top Bar
9
