background image

TIGER

BELT-SANDER FOR WOODEN FLOORS

ED 95

PG. 

3/16

INSTRUCTION MANUAL

INSTRUCTIONS FOR OPERATOR SAFETY

 DANGER:

means

The operator or other person may be seriously injured or die if the

DANGER 

warnings found on this machine or in this manual are

ignored

 

or not kept to. Read and comply with all the 

DANGER

warnings found on this machine or in this manual.

 WARNING:

means

The operator or other persons may be injured if the 

WARNING

s

found on this machine or in this manual are ignored or not kept to.
Read and comply with all the 

WARNING

s found on this machine or

in this manual.

 CAUTION:

means

The operator or other persons may be hurt if the 

CATION

 warnings

found on this machine or in this manual are ignored or not kept to.
Read and comply with all the 

CAUTION

 warnings found on this

machine or in this manual

DANGER

:

Failure to read the 

TIGER

 machine manual before starting up, adjusting or

carrying out maintenance operations on the machine itself may cause injury to
persons and/or damage to things. The operator must be trained to use the machine
before starting it up.

DANGER

Sanding wooden floors may lead to an explosive environment. The following
safety procedures must be applied:

- Cigarettes, cigars, pipes, lighters, pilot lights and all other sources of fire may
cause explosion if they are used while sanding. Sources of fire must be completely
removed from the work area.
- Poorly ventilated work areas may lead to an explosive environment when certain
combustible materials are present in the air, such as, for example, solvents,
thinners, alcohols, fuels, some paints, sawdust and other combustible materials.
Machines for sanding floors can cause combustible materials and vapours to ignite.
- Working with the dust created by sanding may lead to spontaneous combustion or
explosions. Dust from sanding may catch fire and cause injury or damage. Dust
from sanding must be dealt with suitably. Always empty the sanding dust into
metal containers located outside the building.
- Empty the dust bag when it is one-third full. Empty the dust bag each time after
finishing with the machine. Never leave the dust bag unattended when it contains
sanding dust.
- Do not empty the contents of the bag over a fire.
- Knocking against nails while sanding may cause explosion or start a fire. Always
sink all nails completely before sanding the surfaces.

Summary of Contents for Tiger

















Reviews: