OPERATING MANUAL
13
Chisel-Stripper
PM-1600
4 MAINTENANCE
4.1 Care
Before any maintenance / care or repair work unplug the power cord.
Careful care and regular maintenance of the machine are a prerequisite
for function and safety.
Malfunctions that have been caused by inadequate and improper
maintenance can cause very high repair costs and long machine
downtime. Regular maintenance is therefore essential.
CLEANING
Wipe the machine regularly with a dry cloth.
Check the ventilation slots of the machine regularly and keep it clean.
Clean the inside of the hood after each use of fixed dirt and blow out with
dry compressed air.
MAINTENANCE INTERVALS
Daily and before the start of work
- Examine the leads for damage.
- Control of all safety devices for effectiveness.
- Checking all accessible screw connections for tight fit.
Yearly
- Complete overhaul and cleaning of the complete machine.
Due to the different operating conditions, it is not possible to determine in
advance how often an inspection and maintenance is required.
Taking into account the operating conditions, an appropriate inspection
route should be established.
Motor
The motor is equipped with carbon brushes. If the wear limit is reached,
the electronic device switches off automatically.
For worn carbon brushes, a service should be added in addition to brush
replacement a service point.
REPAIR
Repairs or replacement of electrical components must only be carried out
by a specialist. Only use original spare parts.
Summary of Contents for PM-1600
Page 2: ......
