Janser 135SH, User Instructions

Page: 15 / 23

C O L U M B U S
G r i n d i n g m a c h i n e s a n d a c c e s s o r i e s
4 INSTRUCTIONS
OPERATING INSTRUCTIONS
15
4.3 Starting the machine
a. Connect main cable.
WHEN PLUGGING THE MACHINE AND WORKING WITH THE SAME HOLD THE GUIDE
BAR WITH BOTH HANDS FIRM AND SAFE AND NOT CLENCHED!
b. By pulling the lower lever on the right tilt the guide bar back into the convenient
working position and lock it. Release lever.
c. Push the key button on the back of the switch box. Manipulate switch lever.
(Security against unintended turn-on)
d. Release key button, machine is turned on.
e. Release of switch levers turns off machine.
f. For switching on and working with the machine it is sufficient to manipulate
one of the two switch levers.
4.4 Operation
a. The grinding machines are self-runners, that is to say by slightly pushing or
pulling the guide bar the machines move to the left or right.
movement to the left -> pushing guide bar slightly !
movement to the right -> pulling guide bar slightly !
TO AVOID CROSSING THE CABLE WHEN WORKING PUT THE SAME
OVER THE SHOULDER !
4.5 Transport
a. For transporting the machine tip the same slightly back and move the guide bar
into the upright position.
b. Then the machine can easily be tilted backwards and being transported without
problems.