for Mod.145/155 112 332 000
Grinding Plate
Grit 20 with 6 Rectangular Grinding Stones,
replaceable 75 x 90 mm (3 x 3½”)
For grinding of plaster and levelling compound,
removal of residual paint and gypsum, smoothing of
slight unevenness.
Repacement Stone Grit 20
with tapped hole
for Mod.145/155 161 515 003
Grinding Plate
Grit 16 with 5 truncated,conical stones,
For grinding of screed and hard plaster, asphalt and con-
crete. Good grinding rate due to high total edge measu-
rement of hollow conical stones.
Removes unevenness, soft spots, coatings and residual
filling plaster.
for Mod.145+155 112 346 000
Grinding Stone, Grit 16 112 346 001
Replacement Parts
C O L U M B U S
G r i n d i n g m a c h i n e s a n d a c c e s s o r i e s
OPERATING INSTRUCTIONS
10
2 PRODUCT INFORMATION
2.4 Accessories driving discs/brushes/plates
Steel Brush
Wire length 45 mm (1¾”)
For removal of foam backing, adhered residual
underlay and carpet backing for industrial floor
cleaning.
for Mod.145+155 112 319 000
Order-No.:
Order-No.:
Order-No.:
Order-No.:
Order-No.:
Ø 375 mm (14¾”)
Abrasive Disc
metal Grit 14
A thin steel disc with randomly scattered hardmetal
fragments welded to the surface.
For roughing the surface of anhydrite and screed.
Also suitable for levelling off surface irregularities.
for Mod.145+155 112 308 000
Plate with 6 Pot Brushes
For removal of the metallic layer that builds up bet-
ween anhydrite and magnesite screed materials.
Also for the removal of residual foam-backing, plaster
splatter, residual paint coatings etc. and
the removal of adhered underlay.
for Mod.145+155 112 322 000
Pot Brushes 112 321 003
Replacement Parts
Summary of Contents for 135SH
Page 2: ......
