OPERATING INSTRUCTIONS
9
COMPACT
Stripper
4
OPERATION
4.3
Adjusting the working angle
Depending on the flooring condition of the floor covering that is to be
removed, adjust the blade with a tilted angle between 10 and a max. of 30.
If the adjusted angle is too much for the working condition, the resulting
pulsation will cause the RAPID DULLING OF THE WORKING BLADE.
If the adjusted angle is too little for the working condition, the blade will slip
along the flooring NOT CUTTING.
IMPROPER USE, AS DESCRIBED ABOVE, COULD RESULT IN DAMAGE
TO OTHER PARTS OF THE INTERIOR ROOM.
Please ensure before work is begun that proper usage will be
carried out so that damage to other parts of the interior room
is not caused.
When working with the COMPACT - STRIPPER always wear
HEARING PROTECTION !
1. Loosen the 3 self locking nuts (which is position 41) and remove the used
blade.
2. Place the new blade in the same position.
3. Retighten the 4 self locking nuts.
DANGER OF INJURY EXISTS WHEN CHANGING THE BLADE
Always attach safety guard or leather pocket while transporting
and while not in use.
4.4
Changing of the blade
