Jansen Medicars R40.00.00, Directions For Use Manual

Page: 6 / 20

Flexx two manual
Installation, operation and use
Jansen Medicars
V2 2016
Pagina 4
Before you move the cart
Before moving the cart, switch off the central power switch
and unplug the mains socket. Make sure the mains cable
(and other cables) is secured on the cart before moving the
cart.
Keep the doors closed during use to protect the equipment
and to make sure
- the airflow is controlled for internal cooling and
- to prevent the influence of sterile air flows (planum)
ALWAYS POINT THE PERFORATED DOOR AWAY FROM THE
STERILE FIELD.
If the cart is equipped with an arm on which a monitor is
mounted, the arm should be moved completely downwards
and locked before the cart is moved. This is necessary for
the stability of the cart while the cart is moving.
Ensure that objects being transported on the cart are
attached properly. This prevents objects falling off the cart
while it is moving.
Before moving the cart, check that the brakes on both
wheels are off.
Check before and while moving the cart that persons or
objects cannot become trapped by the cart.
The cart must be PUSHED. You then have maximum control
of the cart and you will have a good view of the cart and the
route that you are taking. NEVER PULL THE CART.
Adjust your speed to the immediate circumstances. The cart
should never travel faster than 2km/hour (1.24 mph) so that
control is maintained during unexpected situations. Moving
at a normal walking pace (4 to 5km/hour or 2,5 to 3 mph) is
too fast.